SM-G532F SM-G532G Root File Android 6.0.1 Free Download:
Download the CF-Auto-Root file for the Galaxy Grand Prime SM-G532F/G on Android 6.0.1 from here.
Once downloaded, extract the zip file and you will get the firmware file with a .tar or .md5 extension.
Now, open Odin on your computer and connect your phone to it using the USB cable while your phone is in Download Mode (to enter Download Mode press and hold the Home + Power + Volume Down buttons together for a few seconds).
Download the CF-Auto-Root file for your SM-G532F/SM-G532G device from here.
You May Also Like This Post: TFT MTP Bypass Tool 3.1.1 Tool Free Download
Extract the zip file to get the .tar file.
Now, open Odin on your computer and connect your phone to it.
Once your phone is connected, you will see
This is the official Android 6.0.1 Marshmallow and 7.0 Nougat stock firm the ware/ROM(Flash File) for the Samsung Galaxy J2 Prime SM-G532F and SM-G532G. The flash file for the Samsung Galaxy J2 Prime SM-G532F and SM-G532G is necessary when you want to perform any of the following software-related tasks:
Upgrade/Update your Samsung Galaxy phone’s firmware.
Reinstall the stock ROM that was officially installed.
Unroot your Samsung Android device.
To fix the Bootloop problem
This is a simple and easy guide on how to root your SM-G532F and SM-G532G running on Android 6.0.1 Marshmallow.
SM-G532F SM-G532G Root File Android 6.0.1:
I’ve tested this method on my device and it worked perfectly. Your mileage may vary depending on your specific device model, firmware version, etc. but this should work for most people.
As always, use caution when rooting your devices and make sure you know what you’re doing. I will not be responsible for any damage that may occur to your device during or after the rooting process.
1) Download the CF-Auto-Root ZIP file from here and save it to your PC:
http://download2us.net/Stock%20Rom/S…O%20File/ (If the link above doesn’t work, try this one instead: http://www95.zippyshare.com/v/UPvjz4X9/file.html )
2) Extract the contents of the ZIP file to a new folder on your PC
3) Connect your
Download the CF-Auto-Root file for your device from here.
Extract the zip file to get the .tar.md5 file.
Boot your device into Download mode: Power off your device. Press and hold the Home + Volume Down + Power buttons together until you see a warning screen. Press the Volume Up button to continue to Download mode. Connect your device to the PC using a USB cable.
Open Odin on your PC and connect your phone to it (make sure USB drivers are installed on the PC).
Click on AP in Odin and select the CF-Auto-Root .tar.md5 file that you extracted earlier.
Ensure that Re-partition is NOT ticked, Auto Reboot and F Reset Time are ticked in Odin. DO NOT TICK THE RE-PARTITION OPTION IN ODIN! IT WILL WIPE YOUR DATA! If you accidentally do tick it, unplug your phone immediately, pull out its battery until it dies completely, then charges it up again till 100% completely before repeating this process from step 1 again! Don’t blame me if you don’t heed my words
“Added” message in Odin’s message box located at the top left.
Click on the “AP” button and select the CF Auto Root tar file that you extracted in Step 2.
Once selected, click on the “Start” button in Odin to be the
Effects of SM-G532F SM-G532G Root File Android 6.0.1:
The CF-Auto-Root file allows you to root your Samsung Gthe alaxy Grand Prime Plus SM-G532F or SM-G532G running on Android 6.0.1 Marshmallow. This will also allow you to install custom ROMs, kernels, mods, and much more.
To root your phone, you will need to use a CF-Auto-Root file. This file is available for download from the following link:[http://download.chainfire.eu/731/CF-Auto-Root/CF-Auto-Root-hero2ltexx-hero2ltezm.zip](http://download.chainfire.eu/731/CF-Auto-Root/CF-Auto-Root-hero2ltexx-hero2ltezm.zip)
Once you have downloaded the CFAR file, follow the instructions in this guide to root your phone: [http://www.xda Developers](http://www.xda Developers).com/android/how -to -root -the -Samsung -galaxy -grand prime plus sm g532
gin flashing process.
You May Also Like This Post: Samsung FRP Tool For Qualcomm 100% Working Free Download
This is the CF-Auto-Root file for use with Odin flash tool. This will root your phone running the latest stock firmware for your model of phone.
To install, extract the zip file and open Odin. Click the AP button and select the extracted tar file. Make sure the re-partition is NOT checked, then hit start.
Download Link: HERE
Your File Password: OceanofGSM.com
File Version & Size : 6.0.1 | 18 MB
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Muneeb ur Rehman
Virus Status: 100% Safe Scanned By Avast Antivirus
Table of Contents