Related Articles
Samsung A32 SM-A325F Fix Fingerprint sensor calibration problem Free Download:
Problem: Fingerprint sensor calibration problem Description: After the latest security update, my fingerprint sensor doesn’t work well. When I try to add a new fingerprint, the phone says “Try Again” or “Too Wet”. I have tried all the solutions on the internet but nothing has worked. Solution: Try this solution
Fingerprint sensor calibration is the process of setting up the fingerprint scanner on your device so that it can read your fingerprint correctly. If the fingerprint scanner on your Samsung A32 SM-A325F is not working properly, you may need to recalibrate it. Here’s how to fix the problem: 1. Go to Settings > Security > Fingerprints. 2. If you have multiple fingerprints registered, delete all of them and start from scratch. 3. Follow the on-screen instructions to set up your fingerprints again.
You May Also Like This Post: S-Tool Pro Version 2.3.1 Added MTK Module Free Download
If the fingerprint scanner on your Samsung A32 SM-A325F is not working properly, you may need to recalibrate it. To recalibrate the fingerprint scanner on your Samsung A32 SM-A325F: 1. Go to Settings. 2. Tap the Lock screen and security. 3. Tap Fingerprints. 4. Enter your PIN or password. 5. Tap the trash can icon next to the fingerprint you want to delete. 6. Tap Delete. 7. Repeat steps 5-6 for each fingerprint you want to delete. 8. When you’re finished, tap Add fingerprint and follow the prompts to add new fingerprints
We hope that this guide was helpful to you. If there’s anything else we can do or you have any other questions, please don’t hesitate to reach out to us!
Samsung A32 SM-A325F Fix Fingerprint sensor calibration problem:
The Samsung A32 SM-A325F (Global) is a smartphone launched in February 2021. It features a 6.4-inch display, octa-core processor, and 4 GB of RAM. The device also has 64 GB of internal storage, which can be expanded via a microSD card. The rear camera setup has a 16 MP primary sensor and a 5 MP ultrawide sensor. The selfie camera is 20 MP. The A32 SM-A325F (Global) was announced with Android 10 out of the box but it has since been updated to Android 11. One UI 3.0 is the skin on top of Android 11 on the device. As for the fingerprint sensor calibration problem, there are a few things you can try: 1. Update your phone to the latest software version 2. Perform a factory reset 3. Use an alternative screen lock method
If you have updated your Samsung A32 SM-A325F to the latest software version and are now facing a fingerprint sensor calibration problem, then this post is for you. In this post, we will show you how to fix the fingerprint sensor calibration problem on Samsung A32 SM-A325F. First of all, make sure that you have updated your phone to the latest software version. Once you have done that, go to Settings > Security > Fingerprints and delete all the existing fingerprints. Now, restart your phone and try adding your fingerprints again. This should fix the problem.
Samsung A32 SM-A325F Fix Fingerprint sensor:
If you are facing a problem with Fingerprint sensor calibration in your Samsung A32 then try the following steps to fix it. 1. Go to Settings-> About phone-> Software information and tap 7 times on Build number, this will enable Developer options. 2. Now go back to Settings and you will see Developer options there, open it and scroll down to find Enable OEM to unlock option and enable it. 3. Now reboot your phone into Download mode by pressing and holding Volume Down + Power button together for a few seconds until you see a screen with a Warning message. Press the Volume Up button to continue. 4. Once your phone is in Download mode, connect it to your PC using a USB cable and open the Odin tool. 5. In the Odin tool, click on the AP button and select the stock firmware file with the .tar or .md5 extension which you have downloaded earlier for your phone model. 6. Once the firmware file is loaded, make sure that only the Auto Reboot option is checked in Odin tool and all other options are unchecked/disabled. 7. Finally click on the Start button to begin the flashing process which will take few
You May Also Like This Post: SamFw FRP Tool 3.1 Latest Version Setup Free Download
If your Samsung A32 SM-A325F is facing a problem where can’t use the fingerprint sensor to unlock the phone or authenticate apps, then this post is for you. The problem is caused by a software bug and can be fixed by following the steps below: 1. Go to Settings -> Biometrics and security -> Fingerprints. 2. Delete all existing fingerprints. 3. Add a new fingerprint and make sure to use all 4 fingers while enrolling them. 4. Reboot your phone and try using the fingerprint sensor again.
Open the Settings app on your phone. Tap Biometrics and security. Tap Fingerprint scanner. If you don’t see this option, skip to the next step. Tap Calibrate fingerprint scanner. If you don’t see this option, your phone can’t scan your fingerprint correctly. If prompted, enter your PIN, pattern, or password.
Download Link: HERE
Your File Password: OceanofGSM.com
File Version & Size : A32 SM-A325F | 339 MB
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip the file)
Support OS: All Windows (32-64Bit)
Upload By: Muneeb ur Rehman
Virus Status: 100% Safe Scanned By Avast Antivirus
Table of Contents
